Converting an accessory ceiling pendant light conversion kit to a receptacle is as simple as removing a few screws and make a connection wiring basic electric. You can use the same electrical cables that feed the reservoir that feeds the lamp. In many cases, you may even be able to mount the receptacle in the electrical box lamp. However, a case may require replacement. Instructions, Lamp off in the fuse box. Place a ladder under the lamp.
Remove the screws that hold the pendant light conversion kit to the electrical box using a Phillips screwdriver. Carefully lower the lamp to expose the electrical cables. Twist the wire nuts counterclockwise to loosen the cable connections. Separate cables lamp power supply and place the lamp in a safe place.
Pendant light conversion kit, Hold the new receptacle in the electrical box in the ceiling. If the socket screw holes align with the screw holes of the electrical box, you can use it. However, if the holes are not aligned, you have to replace the electrical box. Remove the screws holding the electrical box nearby roof beam using a drill and a Phillips driving. Remove the electrical box in the ceiling.