To make battery operated lamps we can do these steps. The first steps are strip 1/4-inch of insulation from each end of each length of wire. Strip away carefully 1/4-inch isolation from each end of the two lengths of wire. Connect the plug to light the two lengths of wire. The outlet must have two wires from outside, probably, red and black. Connect the exposed end of an exposed wire length at the end of the red wire and the black wire.
The next steps to make battery operated lamps are connecting two lengths of wire to the battery door. As the light socket, the battery box must have two protruding wires, one red and one black. Connecting the exposed end of the wire for sealing the exposed end of the red lead wire and the black wire connected to the red light source using electrical tape or welding.
Squeeze the bulb in the lamp socket. Insert the lamp screw tip on the outlet and turn the bulb clockwise until it is securely in the socket. Finally, to make battery operated lamps; insert the batteries in the room, taking care to ensure “(flat) negative battery presses against the spring housing. When all batteries are installed, the light should illuminate.