Lithonia Lighting specializes in fluorescent fittings, light emitting diodes and lighting High Intensity Discharge for commercial and residential applications. Its recessed and semi-recessed fixtures, designed for residential use, give the decorative lighting you want for your home combined with fluorescent light bulbs. Replace your existing lighting equipment by installing fluorescent lighting Lithonia semi flush ceiling lights mounting anywhere in your home.
Instructions to install fluorescent Lithonia semi flush ceiling lights: turn off the power supply. Keep a non-contact voltage sensor next to the black cable inside the electrical box in the ceiling. Place the header unit with the two screws by 1 inch 8-32 provided with the unit. Pass the threaded nipple 1 3/4 inches long with the unit, into the center hole in the crossbar. Turn the nozzle clockwise. Mount the semi-flush fixture mount Lithonia Lighting.
Pass the electrical cables in black and white connected to the back of accessory tray. Wrap the bare copper wire from. Tighten the green screw. Connect the black fixture wire from the canopy to the black cable inside the electrical box. Pass and secure the canopy in the nozzle attached to the crossbar. Install fluorescent bulb supplied with the fixture. Turn on new semi flush ceiling lights fixture Lithonia.